The power supply of LED project lights is high-voltage alternating current. During installation, please keep away from the place that is easy to access, and properly ground the lamps to avoid electric shock accidents. When wiring, the installation personnel shall select the appropriate power line according to the power of the bulb actually used, and separate the power supply to avoid affecting the normal use of flood lights. major Solar street lamp It is designed to be waterproof and moisture-proof, and its protection grade can reach IP65. It can withstand the test of rain, but cannot work underwater, and its protection level cannot meet the requirements of underwater work. major Solar street lamp The installation position of shall be able to bear the weight of the projection lamp, and its bearing capacity shall be 10 times greater than the weight of the projection lamp, so that the lamp can be firmly installed and the danger of falling in the future can be avoided.

Computer modeling is used to simulate the luminous angle of the reflector light source and the spatial structure of the LED reflector, track the refraction track of light, and adjust the curvature of the reflector to achieve the light intensity distribution of the reflector The functional requirements of the LED light beam angle are greatly improved major Solar street lamp The light efficiency of the reflector reduces the possibility of astigmatism and glare. The reflective surface can be plated with orange peel and smooth. It can be more uniform and soft, without black holes, yellow circles. High reflection efficiency, no layering, high temperature resistance. The frosted mirror gently reflects light, which is suitable for occasions with weak light such as supermarkets and shopping centers. major Solar street lamp It is not applicable to places with high illumination requirements such as industries and stadiums. If it is used for industrial lighting, it needs a reflector with high refraction and luminous efficiency, and when the light passes through the reflector, it must reduce the light loss.

1. Be able to monitor the temperature of the light source chip pad of the street lamp itself or the temperature of the lamp shell and conduct fault diagnosis; 2. Remote measurement of electrical parameters such as street lamp current and voltage, remote switching of street lamps, remote viewing of on-site operation of important road sections, etc; 3. According to major Solar street lamp The monitoring data of can timely grasp the abnormal position and reason of street lights, and carry out purposeful maintenance without having to go to the whole city for inspection, which speeds up the speed. 4. It has daylight sensor or on-board sensor dimming, energy saving control, time control and even RTC dimming; 5. In some areas with few people and vehicles, it can be controlled at half bright time in the middle of the night, but when people and cars pass by, major Solar street lamp They will reach the distance ahead and in a few cases restore the original brightness. Seconds. 6. The lighting standard level of the same road will change with time and traffic flow.

There are many types of LED street lights, which can be classified according to the following categories. 1 major Solar street lamp Height of street lights: high pole street lights, medium pole lights, street lights, garden lights, lawn lights; 2, according to major Solar street lamp Material of lamp pole: hot-dip galvanized railway lamp, steel street lamp and stainless steel street lamp; 3. Divided by shape: Chinese lamp, antique lamp, landscape lamp, single arm street lamp, double arm street lamp. 4. According to the power supply mode: urban circuit light, solar street light, wind solar complementary street light.

1. Compared with traditional lamps, LED lighting has obvious energy-saving advantages. Just use major Solar street lamp The initial investment to replace traditional lamps has increased, but cost recovery can be achieved by saving electricity charges in a relatively short time. The earlier you replace it, the more you can enjoy the benefits of energy conservation. 2. The energy-saving performance of LED lighting is the choice to replace the traditional mining lamp. In the context of global energy contraction and the national conditions of governments at all levels to vigorously promote energy conservation and environmental protection, replacing traditional lamps will become major Solar street lamp The general trend of. There is a lot to do.