1. Compared with traditional lamps, LED lighting has obvious energy-saving advantages. Just use major Landscape lamp The initial investment to replace traditional lamps has increased, but cost recovery can be achieved by saving electricity charges in a relatively short time. The earlier you replace it, the more you can enjoy the benefits of energy conservation. 2. The energy-saving performance of LED lighting is the choice to replace the traditional mining lamp. In the context of global energy contraction and the national conditions of governments at all levels to vigorously promote energy conservation and environmental protection, replacing traditional lamps will become major Landscape lamp The general trend of. There is a lot to do.

1、 Good corporate culture and elite team. If you want to occupy the market in the competition of the same industry, you need to have an outstanding team. Talent introduction and corporate culture play a very important role. Market competition is team competition. The formation of an elite team needs the support of a good corporate culture. 2、 Verify the status quo and launch luxury products and flagship products. Under the current national policy, environmental protection has become the key point of national governance. Introduction of environment-friendly major Landscape lamp It has become the current development trend of all enterprises. 3、 The price of good quality and good after-sales service products depends on the quality. Only good product quality can lead to good price. As a service industry, good major Landscape lamp After sales service is also very important. If the after-sales service is good, we can retain old customers and develop new customers. As long as there are customers, there is a market for products. Quality is always one.

one major Landscape lamp The charging circuit adopts a dual MOS series control circuit, which can reduce the voltage loss of the circuit by nearly half compared with the use of diodes. The use of PWM energy-saving control greatly increases the power consumption. 2. The load mode adopts pure light control. When the light is dark, the light sensor system will automatically light up. 3. Scientific battery management method. When over discharge occurs, the battery voltage will promote charging. After maintenance and compensation, it can be used normally. Direct charging and floating charging are used to connect rechargeable batteries. 4. All restrictions of all industrial chips and closed components can operate normally in cold, high temperature and humid environments. At the same time, major Landscape lamp The use of crystal oscillator time control can make the time control more accurate.

If there is a problem with the solar street lamp in the countryside, first check whether the photocell is correctly connected, whether the wiring position is in poor contact, and then check whether the battery connection is correct and whether the battery voltage is normal. If the battery is excessively discharged, a fault will occur and it will automatically recover after being fully charged. Among them, major Landscape lamp The stability of the controller is very important for the service life of rural solar street lights, because the role of the solar controller is to control the use major Landscape lamp The battery board charges and discharges the battery. When choosing a solar cell, you must choose a high stability battery to ensure the service life of the battery, because the quality of the battery will also directly affect the service life of the street lamp. It can extend the service life of the whole rural solar street lamp.

1. Lamp holder: it needs to be sealed through the lamp holder. major Landscape lamp The waterproof treatment of lamp cap can ensure the service life of street lamp. Therefore, the selection of street lamp housing is very important. 2. Controller: when selecting, pay attention to whether the style is waterproof. When installing the controller, it is usually placed in the road to better avoid wind and sun exposure. 3. Battery: it needs to have certain waterproof performance. In order to install the battery, please bury the battery about 40cm underground to avoid flooding. After that, test major Landscape lamp Head to check whether the street lamp lights up normally. If it is opened, it can be used normally; otherwise, it needs to be replaced. Light poles need to be hot-dip galvanized to ensure smooth surface, no color difference, no pinholes, and no skin peeling after use.

The power supply of LED project lights is high-voltage alternating current. During installation, please keep away from the place that is easy to access, and properly ground the lamps to avoid electric shock accidents. When wiring, the installation personnel shall select the appropriate power line according to the power of the bulb actually used, and separate the power supply to avoid affecting the normal use of flood lights. major Landscape lamp It is designed to be waterproof and moisture-proof, and its protection grade can reach IP65. It can withstand the test of rain, but cannot work underwater, and its protection level cannot meet the requirements of underwater work. The installation position of the floodlight shall be able to bear the weight of the floodlight, and its bearing capacity shall be greater than major Landscape lamp 10 times the weight, so that the lamp can be firmly installed and avoid the risk of falling in the future.