1. Be able to monitor the temperature of the light source chip pad of the street lamp itself or the temperature of the lamp shell and conduct fault diagnosis; 2. Remote measurement of electrical parameters such as street lamp current and voltage, remote switching of street lamps, remote viewing of on-site operation of important road sections, etc; 3. According to major City circuit lamp The monitoring data of can timely grasp the abnormal position and reason of street lights, and carry out purposeful maintenance without having to go to the whole city for inspection, which speeds up the speed. 4. It has daylight sensor or on-board sensor dimming, energy saving control, time control and even RTC dimming; 5. In some areas with few people and vehicles, it can be controlled at half bright time in the middle of the night, but when people and cars pass by, major City circuit lamp They will reach the distance ahead and in a few cases restore the original brightness. Seconds. 6. The lighting standard level of the same road will change with time and traffic flow.

fixed major City circuit lamp There are many methods, such as ceiling, embedded, hoisting (straight pipe or chain) and wall absorption. Generally, open lamps are usually used indoors. Enamel surface reflector shall be selected, with thick aluminum oxide film or aluminum reflector coated with silicon dioxide protective film. Movable local illuminators are equipped with corresponding handles, hooks, clamps, etc. Fixed local illuminators are usually firmly locked on the working machine by screws or fixing mechanisms. For large factories and large machine tool places requiring separate lighting major City circuit lamp Reflectors made of materials with strong light control characteristics, such as prismatic glass, mirror glass and polished aluminum, to obtain narrow beam distribution.

1. Compared with traditional lamps, LED lighting has obvious energy-saving advantages. Just use major City circuit lamp The initial investment to replace traditional lamps has increased, but cost recovery can be achieved by saving electricity charges in a relatively short time. The earlier you replace it, the more you can enjoy the benefits of energy conservation. 2. The energy-saving performance of LED lighting is the choice to replace the traditional mining lamp. In the context of global energy contraction and the national conditions of governments at all levels to vigorously promote energy conservation and environmental protection, replacing traditional lamps will become major City circuit lamp The general trend of. There is a lot to do.

1. Selection of lamp type: reasonable lamps shall be selected for solar garden lamps. Attention should be paid to determining the light distribution type of the lamp according to the function, size and shape of the garden. 2. Pay attention to the lighting effect of lamps: major City circuit lamp Pay attention to the efficiency of lamps. 3. Attention should be paid to the selection of lamps that are easy to maintain: the daily maintenance of solar garden lamps is a troublesome thing, so we should pay attention to the selection of lamps that are easy to maintain and are not prone to operating problems. 4. Pay attention to special places: some parks have special environment. When high temperature parts such as lamps and lamp accessories are close to combustibles, fire prevention measures such as heat insulation and heat dissipation shall be taken; 5. Pay attention to the appearance of lamps: major City circuit lamp The appearance of the solar garden lamp is in harmony with the courtyard environment, and cannot be placed in an inappropriate place.

(1) Recommended installation height of 50W LED energy-saving mining lamp: 3-5 meters; Installation distance: 5-8m. (2) Recommended installation height of 100W LED energy-saving mining lamp: 6-8m; Installation distance: 8-10 m. (3) 120W LED energy-saving mining lamp Recommended installation height: 8-10m; Installation distance: 8-10 m. （4）150W major City circuit lamp Recommended installation height: 10-15m; Installation distance: 8-12m. （5） major City circuit lamp 200W Recommended installation height: 10-15m; Installation distance: 10-15m. (6) LED energy-saving mining lamp 300W recommended installation height: 15-20m; Installation distance: 20-25m. (7) Recommended installation height of 450W LED energy-saving mining lamp: 15-20m; Installation distance: 25-30m