When the solar street lamp leaves the factory, the working time is generally set according to the customer's requirements. major Square lamp Courtyard lamp The start and stop time of is determined by the street lamp controller. Most of the controllers are installed inside the light door, while most of the lithium battery storage and control integrated machines produced by our company are installed at the bottom of the solar panel. Controller adjustment is divided into manual adjustment and remote control adjustment. The external adjustment button can be adjusted manually. However, most of the current markets are remote control adjustment. This type of controller needs to be equipped with a remote control to adjust the working time. How to adjust major Square lamp Courtyard lamp The time of also depends on the type of controller used.

install major Square lamp Courtyard lamp The construction site shall be provided with safety slogans, warning signs and safety operation instruction boards, which shall not be removed or moved at will. Any movement shall be approved by the person in charge of site construction. When working on site, please pay attention to vehicle access and mechanical lifting. During normal construction, there should be no less than 2 people, and when there is only one person on site, no operation is allowed. Obey the instructions of on-site construction personnel, obey the assignment, unite and complete the production task. Materials on site shall be stacked neatly, and hazardous materials, chemical reagents and flammable materials must be placed separately. It is strictly prohibited to work in flammable and explosive places, open fire, smoking, etc. In operation major Square lamp Courtyard lamp Before that, please check whether the operation site is safe, whether the road is unblocked and whether the protective measures are complete. The tools used should be restored after the work is completed. Please wear safety belt when working at heights, cliffs and steep slopes without protective facilities.

The power supply of LED project lights is high-voltage alternating current. During installation, please keep away from the place that is easy to access, and properly ground the lamps to avoid electric shock accidents. When wiring, the installation personnel shall select the appropriate power line according to the power of the bulb actually used, and separate the power supply to avoid affecting the normal use of flood lights. major Square lamp Courtyard lamp It is designed to be waterproof and moisture-proof, and its protection grade can reach IP65. It can withstand the test of rain, but cannot work underwater, and its protection level cannot meet the requirements of underwater work. major Square lamp Courtyard lamp The installation position of shall be able to bear the weight of the projection lamp, and its bearing capacity shall be 10 times greater than the weight of the projection lamp, so that the lamp can be firmly installed and the danger of falling in the future can be avoided.

Main pole of high pole lamp: major Square lamp Courtyard lamp When the height of the main pole exceeds 20m, the steel plate with a wall thickness of 5.6mm is usually used as the main material. After the overall welding of the high pole lamp, the internal and external surface layers need to be hot-dip galvanized and qualified galvanized. This process can ensure that the main pole will not rust for 15 years. Lifting system: the lifting system is regarded as the core part of the high pole lamp. The landing action of the light panel depends entirely on the landing system. The landing system of high pole lamp is mainly hoist and wire rope. First, install the elevator on the main rod. Weathering and rain will not cause line aging. Secondly, the hoist seldom starts. If major Square lamp Courtyard lamp If the light source has not been damaged in ten years, it will not need to be touched in ten years. Lamp cap: Whether it is LED lamp cap or low pressure sodium lamp, the light source is the main symbol of the whole set of high pole lamp. If the light source is broken and the high pole lamp is broken, the selection of light source quality is particularly important.

Computer modeling is used to simulate the luminous angle of the reflector light source and the spatial structure of the LED reflector, track the refraction track of light, and adjust the curvature of the reflector to achieve the light intensity distribution of the reflector The functional requirements of the LED light beam angle are greatly improved major Square lamp Courtyard lamp The light efficiency of the reflector reduces the possibility of astigmatism and glare. The reflective surface can be plated with orange peel and smooth. It can be more uniform and soft, without black holes, yellow circles. High reflection efficiency, no layering, high temperature resistance. The frosted mirror gently reflects light, which is suitable for occasions with weak light such as supermarkets and shopping centers. major Square lamp Courtyard lamp It is not applicable to places with high illumination requirements such as industries and stadiums. If it is used for industrial lighting, it needs a reflector with high refraction and luminous efficiency, and when the light passes through the reflector, it must reduce the light loss.