Smart solar street lamp is an unusual lamp. It is a smart monitoring street lamp that is powered by solar photovoltaic modules and has street lamp lighting, real-time monitoring, remote data transmission and other functions. Shandong Lanyue Solar LED street lights can customize intelligent control systems according to customer needs.

Product features:

Shandong Lanyue Smart Solar Street Lamp is a system used to monitor various working environments of solar street lamps and control and adjust solar street lamps and their working conditions according to the degree of lighting demand. Through this system, functions such as intelligent dimming of solar street lights, remote control and maintenance, report statistics, parameter reading back, longitude and latitude positioning can be realized. For example, remote control means searching for "Qihang Electrical Intelligent Street Light" in WeChat applet and scanning two-dimensional code, or accessing the backstage through website to realize remote switch, dimming, partition, single side, crossing, etc. of solar street light; Remote control can switch on and off any street lamp at will, and can support full on or full off of street lamps, and can set time to switch on and off street lamps. Remote maintenance means that remote network maintenance can be carried out, and the module has remote parameter setting and maintenance functions. In case of street lamp failure, remote control will display in time, so that staff can arrive at the site in a short time for maintenance.

After the implementation of Shandong Lanyue Smart Solar Street Light, it will not only have a profound impact on society, but also directly produce considerable economic benefits:

·Reduce traffic accidents and various social security incidents caused by lighting failure.

·Strengthen the informatization construction of public lighting management, and improve the ability of emergency dispatching and scientific decision-making.

·Save energy consumption of urban public lighting, build a low-carbon and environment-friendly city, and build a livable area.  

working principle:

Through intelligent transformation, the light source is combined into a smart, environmentally friendly, perceptive and interconnected smart microgrid. Replace the sodium lamp with a new type of lamp. Each lamp is equipped with an intelligent controller to achieve secondary energy saving through on-demand lighting.

The intelligent controller can control the switching, brightness and automatic switching time of lamps through remote terminals (computers, mobile phones). Intelligent LED light time control strategy, light control management, and reasonable time allocation of brightness effectively improve the lighting rate. In daily operation and maintenance, we do not need to switch the light manually frequently to adjust the brightness.

Function configuration:

Light control:

Through intelligent transformation, the light source is combined into a smart, environmentally friendly, perceptive and interconnected smart microgrid. Replace the sodium lamp with a new type of lamp. Each lamp is equipped with an intelligent controller to achieve secondary energy saving through on-demand lighting.

Time control:

The light sensor is used to collect the ambient brightness of the environment where the device is located, and the collected environment is converted into whether the ambient brightness is dark or bright at that time through an algorithm. When it is detected that the ambient brightness reaches the darkness standard, the street lamp will be turned on; When it is detected that the ambient brightness reaches the dawn standard, the street lamp will be turned off. The light control mode takes precedence over the time control. If the darkness reaches a certain value, the light will turn on even if the start time of phase 1 has not yet arrived. On the contrary, if the dawn reaches a certain value, the light will turn off even if the end time of a phase has not yet arrived.

It adopts 6-segment optional time control strategy, which can automatically adjust the load brightness time and power according to user needs. For example:

·The starting time is 18:00, the brightness is 30%, and the ending time is 19:00;

·Start time: 19:01, brightness: 50%, end time: 20:00;

·Start time: 20:01, brightness: 70%, end time: 22:00;

·Start time: 22:01, brightness: 50%, end time: 00:00;

·Start time: 00:01, brightness: 30%, end time: 01:00;

Intelligent power control:

Automatically adjust the load power according to the remaining power of the battery to avoid the failure of lighting due to insufficient battery power.

Routine maintenance:

The terminal will display the fault alarm information reported by the equipment, such as solar panel fault, LED no-load, LED overcurrent, abnormal internal temperature, low battery voltage, etc., to make the fault clear at a glance and make maintenance more convenient.

Daily statistics:

Data collection function: the controller can collect data from the equipment connected to the controller, acquire data in real time through wireless, accurately calculate, record and generate reports.

Map mode:

The map mode focuses on the overall situation, and can see the location of the device, the number of online and the number of lights. You can also select the equipment in a project of the map to turn on, turn off and adjust the light separately.

Product pictures