The flicker of factory lights is a problem encountered by many factories, which not only affects the lighting quality in the factory, but also causes eye fatigue of workers, thus affecting production efficiency. This article will explain how to solve the problem of flickering lights in the plant through the following aspects:

1、 Select appropriate lighting fixtures

First of all, we need to choose a suitable lighting fixture. Select secondary beam emission lamp and lens lamp with strong vertical light, so as to minimize the light directionality and flicker caused by too focusing. At the same time, selecting lamps with large luminous area can make the light more uniform and reduce the problem of light flicker.

2、 Ensure power supply

Secondly, we need to ensure power supply. If the power supply voltage in the plant is unstable and the current fluctuates greatly, the brightness of the light will change, which will cause the light to flash. Therefore, we must have a stable power supply. We can guarantee the stability of power supply by purchasing voltage stabilizer and other equipment. At the same time, we also need to reasonably wire the circuit to avoid the occurrence of current overload or short circuit.

3、 Correct installation of lighting fixtures

Proper installation of lighting fixtures is also important. If it is not installed correctly, the light will flash. First, we need to install in strict accordance with the manufacturer's instructions to avoid unstable contact or poor contact. In addition, the location and number of lamps, as well as the interaction between lamps and the geometric structure in the plant, should also be considered during installation. If it is installed improperly, it will affect the light irradiation range and light distribution, resulting in reflection, blocking, refraction and other phenomena, leading to flickering lights.

4、 Regular cleaning and maintenance

We also need to clean and maintain the lighting fixtures regularly. After a long time of use, the dust and dirt in the lighting fixture will attach to the surface of the fixture, affecting the lighting effect and increasing the risk of light flickering. Therefore, we need to clean the lamps on a regular basis to avoid the color shift and brightness change of the light. In addition, it is also necessary to regularly check the circuit and connector of the lamp to ensure its normal operation.

In a word, flickering of factory lights is a common problem in many factories. We can solve this problem by selecting appropriate lighting fixtures, ensuring power supply, correctly installing lighting fixtures, and regularly cleaning and maintaining them. These measures can improve the lighting effect and provide a safer and more comfortable working environment for employees in the plant.