To improve the service life of factory lights, we can start from the following aspects:

1. Purchase appropriate lamps: choose lamps with good quality and brand. Because generally speaking, lamps with good brands are more strict in design, manufacturing, material selection and other aspects, and their quality is more reliable. In addition, appropriate lamps shall be selected according to the characteristics of the plant, such as ceiling height, brightness requirements, etc.

2. Reasonable installation: the installation position and mode of lamps are very important. The installation height and angle of lamps shall be reasonably selected according to the actual needs to avoid light reflection, light leakage, shadow and other problems. In addition, ensure good ventilation around the lamp to avoid overheating.

3. Use of high-quality bulbs: bulbs are one of the key factors that determine the life of lamps. Choose bulbs with good quality, such as LED bulbs, and the service life of LED lamps can generally reach tens of thousands of hours. Compared with traditional incandescent bulbs or fluorescent lamps, LED bulbs are more durable and energy-saving. In addition, it should be noted that the power of the bulb should match the lamp. Excessive power will accelerate the wear of the bulb and shorten its service life.

4. Pay attention to the electricity environment: maintaining a stable electricity environment also has a great impact on the life of lamps. Avoid too high or too low voltage to avoid damage to electronic components of lamps. In addition, attention should be paid to lightning protection and anti-static, and the lamps should be installed in a well grounded position.

5. Regular cleaning and maintenance: regular cleaning of lamps is one of the important measures to extend the service life. The dust and oil stain on the surface of the lamp shall be removed regularly to maintain the heat dissipation performance of the lamp, avoid heat accumulation and delay the aging of photoelectric components. At the same time, check whether the wiring of the lamps is loose, whether there are short circuits and other problems, and repair them in time.

6. Prevent frequent lamp switching: frequent lamp switching has a great impact on the service life of lamps. Therefore, when using lamps and lanterns, frequent switching of lamps and lanterns should be avoided as far as possible. Induction switches or intelligent lighting systems can be used to realize automatic switching and reduce switching times.

7. Reasonable use of lighting: the use time and brightness of plant lamps shall be reasonably arranged. Avoid high brightness use for a long time, reduce the load of lamps and prolong their service life. You can choose to use energy-saving lamps or adjust the brightness of lamps according to the needs to achieve the dual effect of energy saving and life extension.

8. Timely replace aging bulbs: bulb aging is one of the main reasons affecting the service life of lamps. If the bulb is dark, yellow or the brightness drops significantly, it should be replaced in time to avoid accelerating the death of lamp life.

To sum up, in order to improve the service life of plant lights, we can select appropriate lamps and bulbs, reasonably install and use lamps, regularly clean and maintain them, avoid frequent switching of lamps, reasonably use lighting, etc. These can help extend the service life of lamps, improve the effect and save energy.